Firmware Update

ViewTV AT-163 & AT-263 Firmware Update

NOTE: This firmware update will only work with AT-163's and AT-263's with the HW Version: ABL7802-R836-ATSC

***If you install this update on a unit that does not have this HW Version, your unit may become unusable. ViewTV is not responsible for any units that are made inoperable due to user installing update on a unit that can not support it.***

In order to find the HW Version on your unit:

  1. Press the MENU button on your remote control.
  2. Scroll over to the SYSTEM menu.
  3. Press on the Information option.

Once you have confirmed that this is the HW Version installed on your unit, please follow the following instructions to update your ViewTV AT-163 / AT-263 box.
  1. Download the file below
  2. Unzip the file onto your computer if necessary
  3. Copy the file onto a USB stick (thumb drive) or an external hard drive.
  4. Power up the ViewTV box and plug the USB stick or external hard drive into it.
  5. Press the MENU button on the remote control. Go to System and find the option for upgrade.
  6. Select it and confirm it.
  7. The machine will finish upgrading automatically.

Note: Don't turn off power during the upgrading process.





ViewTV AT-164 Firmware Update

NOTE: This firmware update will only work with AT-164

***If you install this update incorrectly, your unit may become unusable. ViewTV is not responsible for any units that are made inoperable due to user installing update incorrectly. Please read the instructions carefully***

  1. Download the file below
  2. Unzip the file onto your computer if necessary
  3. Copy the file onto a USB stick (thumb drive) or an external hard drive.
  4. Power up the ViewTV box and plug the USB stick or external hard drive into it.
  5. Press the MENU button on the remote control. Go to System and find the option for upgrade.
  6. Select it and confirm it.
  7. The machine will finish upgrading automatically.

Note: Don't turn off power during the upgrading process.





ViewTV AT-300 Firmware Update

NOTE: This firmware update will only work with AT-300

***If you install this update incorrectly, your unit may become unusable. ViewTV is not responsible for any units that are made inoperable due to user installing update incorrectly. Please read the instructions carefully***

  1. Download the file below
  2. Unzip the file onto your computer if necessary
  3. Copy the file onto a USB stick (thumb drive) or an external hard drive.
  4. Power up the ViewTV box and plug the USB stick or external hard drive into it.
  5. Press the MENU button on the remote control. Go to System and find the option for upgrade.
  6. Select it and confirm it.
  7. The machine will finish upgrading automatically.

Note: Don't turn off power during the upgrading process.

Buy Now